Reclaiming external wwn addresses – HP Insight Management-Software User Manual
Page 86
Figure 7-3 WWN Ranges List page
3.
Select a WWN address range. The exclusion range must be contained within the address
range to which the exclusion range belongs. Valid WWN ranges cannot contain all 0s or all
Fs and cannot have an F within either of the first two octets.
4.
Click the Exclusion ranges tab.
5.
To create the exclusion range, click New.
Reclaiming external WWN addresses
External WWN addresses are generated when a VC Domain containing server profiles is removed
from a VC Domain Group. Because every server profile contains one or more WWN addresses
associated with it, VCEM identifies these addresses as external. Addresses identified as external
are reserved for VC Domains outside of VCEM and will not be used by VCEM.
To change the status of an address from External to Free, use the Reclaim External button. Before
freeing an address, verify that the address is no longer used by a VC Domain outside of VCEM.
To reclaim WWN addresses:
1.
From the Virtual Connect Enterprise Manager home page, under the Administration heading,
click the World Wide Names hyperlink.
2.
From the Select ranges to configure link, select WWN. The WWN Ranges List page appears.
3.
Select a WWN address range.
4.
Click the Individual addresses tab.
5.
From the Filter list, select External.
6.
Select the external addresses.
7.
Click Reclaim External. You are prompted to confirm your choices.
8.
Click OK.
86
Managing MAC and WWN addresses