HP Insight Management-Software - Manual (Page 28)

Table 3-3 MAC or WWN address and serial number range compatibility (continued)
VCEM-supported
MAC or WWN or serial number in VC
Domain Group
VC Domain server profiles with MAC
or WWN addresses or serial number
allocated as:
Yes VCEM-defined or user-defined VCEM-defined, HP-predefined, or
user-defined
No Factory VCEM-Defined, HP-predefined, or
user-defined
The VC Domain configuration must be identical to the VC Domain Group configuration. Verify that
the following items are identical:
• Interconnect bays location and model
• Enclosure model
• Domain settings:
—
Configuration for double density servers (for example, BL2x220c)
— Configuration for full-height and half-height single density servers (for example, BL460c,
BL480c)
• Ethernet and iSCSI Flex-10 settings:
— MAC Cache Failover:
Enable Fast MAC Cache Failover
MAC Refresh Interval
— IGMP Snooping:
Enable IGMP Snooping
IGMP Idle Timeout Interval
— Server VLAN Tagging support:
Tunnel VLAN Taggings or Map VLAN Taggings
Force Server connection setting
— Multiple Network Speeding Settings:
Preferred Link Connections
Preferred Link Connection Speed
Maximum Link Connection
Maximum Link Connection Speed
— Network SNMP settings:
Read Community
System Contact
IP addresses
• Fibre Channel SAN Fabric settings:
—
Enables SMI-S
— Fibre Channel SNMP settings: Read Community, System Contact, and IP addresses
• Network and Fibre Channel SAN Fabrics uplinks
• For each single network uplink:
— Network name
— Smart link
— Private Network
— Enable VLAN Tunneling
— State
— Network port location
28 Managing VC Domains