HP StoreAll Storage - Manual (Page 67)

Embedded network adapter
Example 62 Firmware update of the embedded network adapter on 9320/9300 platforms
# hpsp_fmt –f –c NIC
Based on the configuration, Flash recommendation may take 2 minutes.
<<< Completed >>>
# hpsp_fmt -f -c NIC
Flashing NIC: Based on the configuration, it may take 10 minutes.
<<< Succeeded >>>
--------------------------------------------------------------------------------
Device :NIC
Status :Success (Reboot Pending)
Code :0x1001
CONDITIONAL_SUCCESS :Flash succeeded for HP Embedded Network Adapter
using CP016934.scexe. The system must be
restarted to complete the operation.
Reboot Required :Yes
Coordinated Reboot Required :No
--------------------------------------------------------------------------------
SUMMARY:
--------------------------------------------------------------------------------
Device Description Reboot Flash Status
Reqd.
--------------------------------------------------------------------------------
NIC HP Embedded Network Adapter Yes Success (Reboot Pending)
--------------------------------------------------------------------------------
At this stage, you can optionally reboot the server to activate the updated firmware or wait for
other firmware updates, if any, and perform a reboot once for them all.
Updating firmware 67