HP StoreAll Storage - Manual (Page 42)

By category (server/storage/chassis)
Use the component category with the get firmware recommendation command as follows:
•
To get the firmware recommendation for all server components:
# hpsp_fmt –fr server
•
To get the firmware recommendation for all storage components:
# hpsp_fmt –fr storage
•
To get the firmware recommendation for all chassis components:
# hpsp_fmt –fr chassis
Example 29 Get the firmware update recommendation for all server components on an X9720 or
9730 platform
# hpsp_fmt -fr
Since no category argument is specified, operation will be performed on server
components...
Based on the configuration, Flash recommendation may take 5 minutes.
<<< Completed >>>
Single component
To get the firmware update recommendation for a single component, use the –c name>
option along with the –fr option as follows:
# hpsp_fmt –fr –c
The possible component name can be the short form of components shown in the -lc command
output. See the section
“Listing supported components” (page 36) . The example output shows the
short form on the left-hand side and its description on the right-hand side.
NOTE: The same short form is used for the device field/column of all operations.
Example 30 Get the firmware update recommendation for a storage controller on the X9720
platform
# hpsp_fmt -fr -c storage_ctlr
Set of components
To get the firmware recommendation for a set of components, use the –c option with
comma-separated component names as the option parameter, along with the –fr subcommand
as follows:
# hpsp_fmt –fr –c [,]…
42 StoreAll 9730 and IBRIX X9720 FMT command reference and examples