Integrated lights-out (ilo) – HP StoreAll Storage User Manual

Page 66

# hpsp_fmt -f -c BIOS
Flashing BIOS: Based on the configuration, it may take 5 minutes.
<<< Succeeded >>>

--------------------------------------------------------------------------------
Device :BIOS
Status :Success (Reboot Pending)
Code :0x1001
CONDITIONAL_SUCCESS :Flash succeeded for BIOS using CP015473.scexe.
The system must be restarted to complete the
operation.
Reboot Required :Yes
Coordinated Reboot Required :No
--------------------------------------------------------------------------------

SUMMARY:
--------------------------------------------------------------------------------
Device Description Reboot Flash Status
Reqd.
--------------------------------------------------------------------------------
BIOS BIOS Yes Success (Reboot Pending)

--------------------------------------------------------------------------------

At this stage, you can optionally reboot the server to activate the updated firmware or wait for
other firmware updates, if any, and perform one reboot for them all.

Integrated Lights-Out (iLO)

Example 61 Firmware update of the iLO on 9320/9300 platforms

# hpsp_fmt -f -c iLO3
Based on the configuration, Flash recommendation may take 1 minute.
<<< Completed >>>

# hpsp_fmt -f -c iLO3
Flashing ILO3: Based on the configuration, it may take 10 minutes.
<<< Succeeded >>>

--------------------------------------------------------------------------------
Device :ILO3
Status :Success
Code :0x1000
SUCCESS :Flash succeeded for Integrated Lights-Out (iLO) 3
using CP016462.scexe
Reboot Required :No
Coordinated Reboot Required :No
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

StoreAll 9320 and 9300 FMT command reference and examples