HP StoreAll Storage - Manual (Page 18)

Table 24 Command option descriptions (continued)
Description Option
Reports the output as text or XML format. -F, or --format
Forces the firmware update operation regardless of the recommended update
action. The –force option is required for the firmware downgrade and rewrite
operations. -fo, or --force
This option is applicable for a single component firmware update.
Redirects the output to the specified file. -o, or --outputfile
Reboots the server after a successful firmware update operation. This option is
ignored if: -r, or --reboot
•
None of the components require a reboot.
•
One or more of the components requires a reboot.
Enables noninteractive mode. All user prompts are suppressed, including flash
consideration notes. -s, or --scriptmode
Displays the detailed information (not applicable for the discover operation). -v, or --verbose
Forces the firmware update operation regardless of the server role (master or
slave). -i, or --ignorerole
Ignores the disk dual path check before flashing the SAS switch. -ic, or
--ignorediskdualpathcheck
Used with the —component option. Updates the firmware of a specified device
for a single component type. Supported only for the SAS switch. -id, or --deviceid
ID>
The IP address of the Onboard Administrator. -oi, or --oaip
The password of the Onboard Administrator. -op, or --oapasswd
The user account with administrative privileges for the Onboard Administrator. -ou, or --oauser
The password for a Virtual Connect. -vp, or --vcpasswd
A user account with administrative privileges for a Virtual Connect. -vu, or --vcuser
CLI exit status codes
The hpsp_fmt command exit status codes to describe the overall result of the operation.
Table 25 (page 18) lists these exit status codes and their descriptions for each operation.
Table 25 CLI exit status codes
Description Exit code Operation
The firmware version of all the components has been discovered successfully. 0 Discover active firmware
version
Error—Failed to discover the active firmware version of one or more
components. 4
No firmware update is needed. 0 Get firmware update
recommendation
A firmware update is needed, but no reboot is required. 1
A firmware update is needed and a reboot is required. 2
A firmware update is needed and a coordinated reboot is required. 3
Error—Failed to get a firmware update recommendation for one or more
components. 4
18 Command reference