Bios, Integrated lights-out (ilo), Embedded network adapter – HP StoreAll Storage User Manual

Page 45

BIOS

Example 32 Firmware update of the BIOS on 9730 and X9720 platforms

# hpsp_fmt -f -c bios
Flashing BIOS: Based on the configuration, it may take 5 minutes.
<<< Succeeded >>>

--------------------------------------------------------------------------------
Device :BIOS
Status :Success (Reboot Pending)
Code :0x1001
CONDITIONAL_SUCCESS :Flash succeeded for BIOS using CP015510.scexe.
The system must be restarted to complete the
operation.
Reboot Required :Yes
Coordinated Reboot Required :No
--------------------------------------------------------------------------------

SUMMARY:
--------------------------------------------------------------------------------
Device Description Reboot Flash Status
Reqd.
--------------------------------------------------------------------------------
BIOS BIOS Yes Success (Reboot Pending)

--------------------------------------------------------------------------------

Integrated Lights-Out (iLO)

Example 33 Firmware update of the iLO on 9730 and X9720 platforms

# hpsp_fmt -f -c ilo3
Flashing ILO3: Based on the configuration, it may take 10 minutes.
<<< Succeeded >>>

--------------------------------------------------------------------------------
Device :ILO3
Status :Success
Code :0x1000
SUCCESS :Flash succeeded for Integrated Lights-Out (iLO) 3
using CP016462.scexe
Reboot Required :No
Coordinated Reboot Required :No
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

Embedded network adapter

Example 34 Firmware update of the embedded network adapter on 9730 and X9720 platforms

# hpsp_fmt –f –c NIC
Flashing NIC: Based on the configuration, it may take 10 minutes.
<<< Succeeded >>>
--------------------------------------------------------------------------------
Device :NIC
Status :Success (Reboot Pending)
Code :0x1001
CONDITIONAL_SUCCESS :Flash succeeded for HP Embedded Network Adapter
using CP017785.scexe. The system must be
restarted to complete the operation.

Updating firmware