HP 3000 Enterprise Virtual Array - Manual (Page 30)

NOTE:
If you enter an incorrect WWN or checksum, the system will reject the data and you must repeat the
procedure.
Entering the storage system password
The eight-character storage system password feature enables you to restrict management access to the
storage system. Table 3 describes the push button functions when using the password feature.
Table 3 System password push button functions
Button Function
Selects a password character by scrolling up through the character list one character
at a time.
• Moves from the default display to the system menu tree.
• Moves from the system password display to the password entry display.
• Accepts the current character and selects the next character.
If you accept an incorrect character, you can loop through the display, one position at
time, to select the character to be changed.
Selects a password character by scrolling down through the character list one character
at a time.
Accepts all the password characters.
Complete the following procedure to set the password:
1. Select a unique eight-character password using uppercase or lowercase letters A through Z.
2. From the default menu, press any push button to select the menu tree.
3. Press to cycle through the displays until System Password is displayed.
4. Press to select the system password function.
5. When the System Password function is flashing, press to select the change password function.
6. To change the password, press or to show Yes and press .
The default Enter Password function displays the default password, AAAAAAAA.
7. Press or until the first character of the password is displayed.
8. Press to accept this character and select the next character.
9. Repeat the process to enter the remaining password characters.
10. Press to enter the password and return to the default menu display.
The controller pair setup is complete.
Installing HP Command View EVA
HP Command View EVA is installed on a management server. Installation may be skipped if the
latest version of HP Command View EVA is running. Verify the latest version at the HP website:
http://h18006.www1.hp.com/storage/software.html .
See the HP StorageWorks Command View EVA installation guide for information on installing the software.
30 Enterprise Virtual Array startup