HP 3000 Enterprise Virtual Array - Manual (Page 141)

Displaying Detailed Information
The Detail View menu lets you examine detailed fault information stored in the Last Termination Event
Array (LTEA). This array stores information for the last 32 termination events.
Complete the following procedure to display the LTEA information about any of the last 32 termination
events:
1. When the Fault Management display is active (flashing), press to select the Detail View menu.
The LTEA selection menu is active (LTEA 0 is displayed).
2. Press or to increment to a specific error.
3. Press to observe data about the selected error.
Interpreting fault management information
Each version of HP Command View EVA includes an ASCII text file that defines all the codes that the
authorized service representative can view either on the GUI or on the OCP.
IMPORTANT:
This information is for the exclusive use of the authorized service representative.
The file name identifies the file type and the revision date. For example, the file name
hsv110_event_w010605_t100.txt provides the following information:
•
hsv110_
—The EVA controller model number
•
event_
—The type of information in the file
•
w010605_
—the base level build string (the file creation date).
• 01—creation year
• 06—creation month
• 05—creation date
•
t100
—the NSC software version number string.
Table 52 describes types of information available in this file.
HP StorageWorks 3000/5000 Enterprise Virtual Array user guide (VCS 4.xxx) 141