HP 3000 Enterprise Virtual Array - Manual (Page 112)

Table 32 AC input current and wattage
Nominal Maximum
Input voltage Amps Watts Amps Watts
60–Hz input
100 VAC–JBOD 4.35 436 6.41 641
208 VAC–North America 2.03 419 2.94 609
50–Hz Input
120 VAC–JBOD 3.59 419 5.27 633
220 VAC–North America 1.92 418 2.78 608
230 VAC–North America 1.92 418 2.78 608
240 VAC–Europe 1.76 416 2.55 607
Table 33 Output voltage and current specifications
Range
Specification Minimum Nominal Maximum
+5.1 VDC
Initial Voltage, Steady
state current
+5.13 VDC, 1.0 A +5.18 VDC N/A +5.23 VDC, 26.0 A
+12.2 VDC (Disk Drive Voltage)
Initial Voltage, Steady
state current
+12.13 VDC, 1.0 A +12.25 VDC N/A +12.37 VDC, 26.0 A
+12.5 VDC (Disk Drive Voltage)
Initial Voltage, Steady
state current
+12.25 VDC,
0.0 0A
+12.50 VDC N/A +12.75 VDC, 2.0 A
Table 34 Power specifications
Voltage Current (A) Power (W)
>Maximum continuous current
+5.1 VDC (with a minimum +12.2
VDC load of 0A)
26.0 A 132 W
+12.2 VDC (with a minimum +5
VDC load of 4A)
28.0 A 342.0 W
+12.5 VDC 2.0 A 25.0 W
Total 499.0 W
Maximum peak current (simultaneous seek activity)
+5.1 VDC 26.0 A 132.0 W
+12.2 VDC 43.0 A 524.0 W
+12.5 VDC 2.0 A 25.0 W
Total 681.0 W
112 Regulatory notices and specifications