HP 3000 Enterprise Virtual Array - Manual (Page 142)

Table 52 Controller event text description file
Information type Description
Event Code This hexadecimal code identifies the reported event type.
Termination Code (TC) The hexadecimal code specifies the condition that generated the
termination code. It might also define either a system or user initiated
corrective action.
Coupled Crash Control Codes This single digit, decimal character defines the requirement for the other
controller to initiate a coupled crash control.0. Other controller SHOULD
NOT complete a coupled crash.1. Other controller SHOULD complete a
coupled crash.
Dump/Restart Control Codes This single decimal character (0, 1, 3) defines the requirement to:0.
Perform a crash dump and then restart the controller.1. DO NOT perform
a crash dump; just restart the controller.3. DO NOT perform a crash
dump; DO NOT restart the controller
Corrective Action Codes (CAC) These hexadecimal codes supplement the Termination Code information
to identify the faulty element and the recommended corrective action.
Software Component ID Codes
(SWCID)
These decimal codes identify software associated with the event.
Event Information Packets (EIP) These codes specify the packet organization for specific type events.
142 Controller fault management