HP Integrity NonStop H-Series - Manual (Page 66)

Operating the Tape Drive
N1525A ACL Installation and User’s Guide — 527339-003
3- 32
Loading and Unloading Tape Cartridges
Loading and Unloading Tape Cartridges
The Load/Unload menu enables you to specify a source and a destination for a
tape cartridge. As a result, the procedure is the same for both load and unload.
To load or unload a tape from the front panel of the tape drive, use the
Load/Unload menus.
Figure 3-20 shows a default screen. LTO1 has a tape loaded. When this screen
indicates LTO1 Idle, the tape drive has a tape cartridge loaded and is awaiting
instructions. All slots in the magazine are empty.
From the Default screen, enter the Menu mode by pressing Enter. The Main
menu shown in
Figure 3-21 appears.
Figure 3-20. Default Screen
Note. If the control panel has been locked and you do not know the unlock code, contact the
server administrator.