HP Integrity NonStop H-Series - Manual (Page 32)

Installing and Configuring the Tape Drive
N1525A ACL Installation and User’s Guide — 527339-003
2- 12
Set Default (Restricted)
Set Default (Restricted)
This option resets all of the preceding configuration options to their factory
defaults. Under no circumstances should you use this option.
Table 2-2 summarizes the configuration and default settings for the tape drive.
Other possible settings appear in the second column.
Table 2-2. Tape Drive Configuration Options
Option Settings Default
Data Format Density: Auto Selection
Compression: Enable, Disable
(Enable at 10.0 only)
Auto
Auto
SCSI Lib Bus Parity: Enable, Disable
Lib Bus ID: (SCSI ID)
LTO1 Bus ID: (SCSI ID)
Enabled
3
5
Library Mode Random, Seq. LTO1
Sequential Mode: Normal,
Recirculate
Sequential
Normal
Element Base Transport: NNNN (hex)
Storage: NNNN (hex)
Transfer: NNNN (hex)
0000
0001
00F0
Identification Vendor ID: OVERLAND
Product ID: LoaderXpress
HP
N1525A
Date DD,MMM,YYYY Current Date
Time HH, MM Current Time
Baud Rate [TSI CE use only] 38400
Serial Number NNNNNNNNN 999999999
Unload Mode Implicit, Explicit Implicit
AutoClean Mode Disabled, Enabled Disabled
Negotiation Negotiation Mode: Do Not
Initiate, Initiate
Transfer Rate: Sync. 10
megabytes/second
Do Not Initiate
10 megabytes/second