HP Integrity NonStop H-Series - Manual (Page 60)

Operating the Tape Drive
N1525A ACL Installation and User’s Guide — 527339-003
3- 26
Displaying Firmware Revision
When you press Enter, the screen in Figure 3-16 appears.
Scroll to set the first digit of the unlock code. Press Enter to move the cursor to
the second digit and repeat the process. After you enter the unlock code, press
Escape. Press Enter to validate the unlock code or Escape to exit. If the code is
correct, the Main menu appears. If the code is incorrect, an error screen
appears.
Displaying Firmware Revision
You can display the firmware revision of the robotics at any time from the Library
Status menu under the Show Status menu. It appears on line 2 of the POST
screen and the Initialization screens.
Figure 3-16. Code Entry Menu