HP Integrity NonStop H-Series - Manual (Page 59)

Operating the Tape Drive
N1525A ACL Installation and User’s Guide — 527339-003
3- 25
Unlocking the Control Panel
Unlocking the Control Panel
After you lock the control panel through the Security menu, you are prompted to
enter the security code to enter the Menu mode. The security code entry screen
shown in
Figure 3-15 appears.
Figure 3-15. Panel Locked Screen
Note. The control panel lock also prevents operator access to the Unlock Door command on
the Main menu. For a detailed discussion of tape magazine locking, see "
Removing the Tape
Magazine on page 3-29" and " Inserting a Tape Magazine Into the Tape Drive on page 3-29".
Even while the control panel is locked, you can still display the status menu without using the
security code by pressing Escape at the Default screen.