Entering the menu mode, Figure 3-7, Main menu – HP Integrity NonStop H-Series User Manual
Page 46
Operating the Tape Drive
N1525A ACL Installation and User’s Guide — 527339-003
3- 12
Entering the Menu Mode
Entering the Menu Mode
When the Default screen appears, enter the Menu mode by pressing Enter. The
Main menu appears as shown.
Note. When you press Enter to enter the Menu mode, the Ready LED goes out, indicating that
the tape drive is offline. The tape drive responds to all SCSI commands from the server by
reporting “Not Ready” until you exit the Menu mode and the Ready LED is lit.
To prevent inadvertent interruption of server operations, you can lock the menu mode by using
the Security menu. When the control panel is locked, you must enter the unlock code to display
the Main menu. The Show Status menu remains accessible. You can display it from the Default
screen at any time by pressing Escape.
Figure 3-7. Main Menu
Note. If the control panel is locked, you need the unlock code for the specific tape drive before
proceeding. If you do not know the code, contact the server administrator.