Power supply, Tape cartridge magazine, Integral fan cooling – HP Integrity NonStop H-Series User Manual
Page 18: Figure 1-2, Cartridge tape magazine
Overview of the Tape Drive
N1525A ACL Installation and User’s Guide — 527339-003
1 -2
Power Supply
Power Supply
The AC power switch is located on the front panel of the tape drive. The nominal
voltages are 115 V ac and 240 V ac, and the autoranging power supply adjusts
automatically to either of the two operating voltages. The power supply can
operate at 50 or 60 hertz without requiring any modification.
Tape Cartridge Magazine
The 11-cartridge tape magazine is accessible through the door at the center of
the front panel. An electronically controlled lock on the door protects against
tampering and inadvertent removal. The magazine fits into a extruded track that
assures precise robotics positioning.
shows a 11-cartridge tape
magazine.
Integral Fan Cooling
To provide optimum cooling for critical parts, a single forced-air fan is mounted
on the rear panel. It also prevents the tape drive, robotics electronics, motors,
and power supply from overheating.
Figure 1-2.
11-Cartridge Tape Magazine