HP Integrity NonStop H-Series - Manual (Page 43)

Operating the Tape Drive
N1525A ACL Installation and User’s Guide — 527339-003
3 -9
Buttons
The screen's second line displays possible status conditions of the library
robotics:
•
Loader Idle
•
Fetch
•
Stow
•
Diag Active
•
Diag Complete
•
Taking Inventory
•
Elevator Home
•
Checking Drive(s)
•
Orphaned Cartridge
•
Trapped Cartridge
•
Scanning Labels.
The third line in Figure 3-4 on page 3-7 represents a map of the tape magazine.
An 11-slot tape magazine is shown. The number 1 shows the location of slot 1
(the front slot) in the map. The number 11 shows the location of slot 11 (the rear
slot) in the map. A rectangle on this line indicates that a cartridge is present in
the corresponding slot of the tape magazine. An underline means no cartridge is
present.