HP Integrity NonStop H-Series - Manual (Page 61)

Operating the Tape Drive
N1525A ACL Installation and User’s Guide — 527339-003
3- 27
Displaying Error Logs
Displaying Error Logs
To display the error history of the tape drive:
1. At the Default screen, press Enter to enter the Menu mode. The Main menu
appears.
2. At the Main menu, scroll down until the cursor is next to Show History Menu.
3. Press Enter to select the menu.
4. At the Show History menu, scroll down so that the cursor is next to Error
History.
5. Press Enter to select the function. A list of 4-line error reports appears in the
format shown in Figure 3-17 .
6. Scroll through the list to display the error history of the tape drive.
Figure 3-17. Error History Screen