HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 98)

Switch Admin Window
98 Web Tools Version 3.1.x/4.1.x User Guide
About the Network Config Tab
Use the Network Config tab of the Administrative interface to manage the IP
networking functionality of the switch.
For more detailed information regarding network configuration, see the HP
StorageWorks Fabric Operating System Procedures Version 3.1.x/4.1.x User
Guide or
configure command in the HP StorageWorks Fabric OS Version
3.1.x/4.1.x Reference Guide.
Syslog IP
Syslog IP represents the IP address of the server that is running the Syslog
process. The Syslog daemon reads and forwards system messages to the
appropriate log files and/or users, depending on the system configuration. When
one or more IP addresses are configured, the switch forwards all error log entries
to the syslogs on the specified servers. Up to six servers are supported. See the HP
StorageWorks Fabric Operating System Procedures Version 3.1.x/4.1.x User
Guide for more information on configuring the Syslog daemon.
Switch Identification
If both the Fibre Channel IP and Ethernet IP are present, the switch is identified by
the Fibre Channel IP.
Network Config Tab Example
An example of the Network Config tab is shown in Figure 19 .