HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 41)

Installation
41 Web Tools Version 3.1.x/4.1.x User Guide
Licensing Web Tools on the Switch
An HP Web Tools license can be installed either through Telnet or over the web.
To determine whether a license is already installed on a switch, follow the
instructions provided under “
Launching HP Web Tools ” on page 43. If a license is
not installed, contact your switch supplier to obtain a license key.
Installing a Web Tools License Through Telnet
To install an HP Web Tools license through Telnet:
1. Log onto the switch by Telnet (See the HP StorageWorks Fabric Operating
System Procedures Version 3.1.x/4.1.x User Guide for more information),
using an account that has administrative privileges.
2. To determine whether an HP Web Tools license is already installed on the
switch, type licenseshow on the Telnet command line.
A list displays, showing all the licenses currently installed on the switch.
switch:admin> licenseshow
1A1AaAaaaAAAA1a:
Zoning license
SES license
QuickLoop license
If the HP Web Tools license is not included in the list or is incorrect, continue
with step [3].
3. Enter the following on the command line:
licenseadd “key”
where “
key
” is the license key. The license key value is case-sensitive, and must
be entered exactly as given.
4. Verify the license was added by entering the following on the command line:
licenseshow
If the HP Web Tools license is listed, the feature is available. If the license is not
listed, repeat step [3].
Note: The Java Plug-in must also be installed on the client machine to access HP Web
Tools.