HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 100)

Switch Admin Window
100 Web Tools Version 3.1.x/4.1.x User Guide
Figure 20: Advanced IP Configuration Window (Core Switch 2/64 only)
Network Config Field Descriptions
The Network Config fields are described in Table 19 .
Table 19: Network Config Field Descriptions
Field Description
Ethernet IP Displays the Ethernet IP address.
Ethernet Mask Displays the Ethernet SubnetMask address.
Gateway IP Displays the Gateway IP address.
Fibre Channel Net
IP
Displays the Fibre Channel IP address, if one exists.
Fibre Channel
NetMask
Displays the Fibre Channel subnet mask address, if one
exists.
Advanced Button Displays the Advanced IP Configuration window ( Figure 20 ).
This window displays the IP information configured for each
network element (CP1, CP1, Logical Switch 0, and Logical
Switch 1) in the Core Switch 2/64. This window is read-only
and is only available for the Core Switch 2/64.
Syslog IPs
Syslog IP window Displays the currently configured syslog recipients. See the
HP StorageWorks Fabric Operating System Procedures
Version 3.1.x/4.1.x User Guide for more information about
configuring the Syslog daemon.
Syslog IP Field Enter any valid IP for a host and click the Add button to
configure that IP as a recipient of syslog messages.