HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 36)

Installation
36 Web Tools Version 3.1.x/4.1.x User Guide
Requirements
The workstation and the switch must meet both specific requirements for the
correct installation and operation of HP Web Tools.
Switch Requirements
HP Web Tools 3.1 can be used to manage Switches that are running V3.1
firmware, including HP StorageWorks SAN switches 2/8, 2/8-EL, and 2/16.
Workstation Requirements
The following items are required for the operation of HP Web Tools:
One of the following operating systems:
■ Sun Solaris 2.7 or 2.8
■ Windows 2000, or Windows XP
■ Windows NT 4.0
Adequate RAM (required for Windows operating systems only):
■ 128 MB or more of RAM for fabrics consisting of 10 switches or less
■ 256 MB or more of RAM for fabrics consisting of 15 switches or less
■ 512 MB or more of RAM for fabrics consisting of more than 15 switches
Adequate RAM for video display:
■ Minimum 8MB of video RAM is recommended
Web Browser Requirements
One of the following web browsers is required:
■ Microsoft Internet Explorer 5.5 (Service Pack 2 is recommended) or later.
■ Netscape 4.77 for Solaris
The browser must be configured to work with HP Web Tools. For information
about how to do this, see “
Configuring the Web Browser ” on page 38.
Note: Due to decreasing customer demand and an increasing number of significant
technical incompatibilities, the combination of the Netscape browser running on the
Windows operating system is no longer supported for use with HP Web Tools.