HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 244)

Zone Administration
244 Web Tools Version 3.1.x/4.1.x User Guide
11. Select the Actions > Save Config Only option. The new Config appears in
the Name drop-down list. To enable the configuration, see “ Enabling a
Configuration ” on page 214.
Note: Any changes made to the currently enabled configuration will not appear until
the configuration is re-enabled.
Modifying the Members of a Config
To modify the members of a Config, perform the following steps:
1. Access the Zone Administration window.
See “ Accessing the Zone Administration Window ” on page 204 for more
information.
2. Select the Config tab.
3. From the Name drop-down menu, select the Config you want to modify.
4. Highlight an element in the Member Selection List that you want to include in
your Config or
highlight an element in the Config Members list that you want to delete.
5. Click the Add Member button to add a Config member or
Click the Remove Member button to remove a Config member.
Note: You can make changes to a Configuration that is currently enabled; changes will
not appear until the Configuration is disabled and re-enabled.
6. Select the Actions > Save Config Only option.
Note: The Configuration changes will be saved. Changes will not take effect until the
Configuration is re-enabled.
To enable the configuration, see “ Enabling a Configuration ” on page 214.