HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 108)

Switch Admin Window
108 Web Tools Version 3.1.x/4.1.x User Guide
About the SNMP Tab
Use the SNMP tab of the Administrative Interface to perform administration of
the SNMP Subsystem. Use the SNMP tab to specify the switch community string,
location, trap level and trap recipients.
For more detailed information regarding SNMP, see the agtcfgset command
in the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Reference Guide.
Security
The SNMP tab is affected by the use of Secure Fabric OS; the ACL list will not be
visible if security is enabled. For specific information regarding security, refer to
the HP StorageWorks Secure Fabric OS Version 1.0 User Guide.
Note: In order for the switches to send SNMP traps, you must first enter the CLI
command
snmpmibcapset
. This enables the MIBs on all switches to be monitored.
SNMP Tab Example
An example of the SNMP window is shown in Figure 22 .