4 dc current measurements, Table 9-5, Table 9-6 – AMD Geode SC3200 User Manual
Page 354: Dc characteristics for on state

354
AMD Geode™ SC3200 Processor Data Book
Electrical Specifications
32581C
9.1.5.3
Definition of System Conditions for
Measuring On Parameters
The SC3200’s current is highly dependent on two func-
tional characteristics, DCLK (DOT clock) and SDRAM fre-
quency. Table 9-5 shows how these factors are controlled
when measuring the typical average and absolute maxi-
mum processor current parameters.
9.1.5.4
DC Current Measurements
Table 9-6 and Table 9-7 show the DC current measure-
ments of the SC3200.
Table 9-5. System Conditions Used to Measure SC3200 Current During On State
CPU Current Measurement
System Conditions
V
CORE
(Note 1_
V
IO
(Note 1)
DCLK
Frequency
SDRAM
Frequency
Typical Average
Nominal
Nominal
50 MHz (Note 2)
Nominal
Absolute Maximum
Max
Max
135 MHz (Note 3)
Max
Note 1. See Table 9-3 on page 352 for nominal and maximum voltages.
Note 2. A DCLK frequency of 50 MHz is derived by setting the display mode to 800x600x8 bpp at 75 Hz, using a display
image of vertical stripes (4-pixel wide) alternating between black and white with power management disabled.
Note 3. A DCLK frequency of 135 MHz is derived by setting the display mode to 1280x1024x8 bpp at 75 Hz, using a display
image of vertical stripes (1-pixel wide) alternating between black and white with power management disabled.
Table 9-6. DC Characteristics for On State
Symbol
Parameter (Note 1)
Typ Avg
Abs Max
Unit
Comments
I
CC3ON
f
CLK
= 233 MHz, I/O Current @ V
IO
= 3.3V
(Nominal); CPU state = On
260
300
mA
I
CC
for V
IO
f
CLK
= 266 MHz, I/O Current @ V
IO
= 3.3V
(Nominal); CPU state = On
270
310
I
COREON
f
CLK
= 233 MHz, Core Current @ V
CORE
=
1.8V (Nominal); CPU state = On
820
990
mA
I
CC
for V
CORE
f
CLK
= 266 MHz, Core Current @ V
CORE
=
1.8V (Nominal); CPU state = On
900
1090
I
SBON
SB Current @ V
SB
= 3.3V (Nominal);
CPU state = On
1
2
mA
I
SBLON
SBL Current @ V
SBL
= 1.8V (Nominal);
CPU state = On
10
20
mA
SBL Current @ V
SBL
= 2.0V (Nominal);
CPU state = On
10
20
Note 1. f
CLK
ratings refer to internal clock frequency.