Cannot calibrate, Excessive temperature or humidity, Please execute common calibration – Canon imagePROGRAF iPF6400S User Manual
Page 984
Cause
Corrective Action
The loaded paper is too small.
(When you have attempted to print a test print sheet
or other printer status information.)
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
"Replace with a 16-inch wide or wider roll paper."
Cause
Corrective Action
The loaded paper is too small.
(When you have attempted to print a test print sheet or other print-
er status information.)
Replace the roll with a roll 16 inches in width or larger as follows.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
2.
Replace the roll with a roll 16 inches wide or larger.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Cannot calibrate.
Cannot calibrate.
Cause
Corrective Action
The paper for printing a test pattern is soiled. Oth-
erwise, you have loaded colored paper.
Press the OK button to clear the error.
Load unused paper compatible with color calibration.
See the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
The test pattern was printed too faintly.
Press the OK button to clear the error.
Take steps to remedy faint printing.
(See "Printing is faint.")
Direct sunlight or strong lighting may be shining
on the printer and causing the sensor to malfunc-
tion.
Press the OK button to clear the error.
Take steps to ensure the printer is not used when exposed to direct sunlight or strong
lighting.
Excessive temperature or humidity.
Excessive temperature or humidity.
Cause
Corrective Action
The temperature or humidity
where the printer is installed is
out of the acceptable range for
operation.
Press ▲ or ▼ to select Stop, and then press the OK button to stop printing.
Use the printer under suitable environmental conditions. Also note that various environmental conditions are
recommended for various types of paper. For details on the recommended environmental conditions, see
the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
Please execute common calibration.
Please execute common calibration.
Cause
Corrective Action
There is not even one Common calibration execution result.
Note that this is displayed when all of the following are satisfied.
•
If Set Exec. Guide is On in the Control Panel menu.
•
If the printer is loaded with a type of paper on which color calibration cannot be executed.
Execute Common calibration.
(See "Color Calibration Using the Printer Sen-
sor.")
Set Set Exec. Guide to Off on the Control Pan-
el menu.
(See "Menu Structure.")
Cannot calibrate.
iPF6400S
Error Message
Messages regarding printing or adjustment
984