Removing the roll from the printer, See "removing the roll from the printer, P.514 – Canon imagePROGRAF iPF6400S User Manual
Page 514

4
Press ▲ or ▼ to select Roll Length, and then press the OK button.
5
Press ▲ or ▼ to select the length of paper loaded in the printer, and then press the OK button.
Specify the roll length as follows.
1.
Press the
◀ or ▶ button to move to the next field for input.
2.
Press the ▲ or ▼ button to enter the value.
3.
Repeat steps 1 and 2 to finish entering the value, and then press the OK button.
Removing the Roll from the Printer
Removing the Roll from the Printer
Remove rolls from the printer as follows.
Important
•
Once a roll has been advanced, do not pull the paper out by force. This will prevent further feeding, and the printer will be
unable to keep track of the amount of roll paper left.
If you accidentally pull out paper, follow these steps to remove the roll, and open the paper feed slot.
Note
•
If you need to cut the roll, see "Specifying the Cutting Method for Rolls."
•
The operations for a printer with a Spectrophotometer Unit (option) are the same as for a printer with no Spectrophotometer
Unit (option). If it is difficult to remove from the front of the printer, lowering the Up-down Unit may make the operation easier
from the front of the printer. (See "Lowering the Up-down Unit of the Spectrophotometer Unit (option) Manually.")
1
On the Tab Selection screen of the Control Panel, press
◀ or ▶ to se-
lect the
( Paper tab) .
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Eject Paper, and then press the OK button.
4
Press ▲ or ▼ to select Yes, and then press the OK button.
The roll is rewound.
Important
•
If you have selected ManageRemainRoll > On in the
Control Panel menu, a barcode is printed on the leading
edge of the roll.
Do not remove the roll before the barcode is printed. You
will be unable to keep track of the amount of roll paper
left. (See "Keeping Track of the Amount of Roll Paper Left.")
Removing the Roll from the Printer
iPF6400S
Handling and Use of Paper
Handling rolls
514