P.74 – Canon imagePROGRAF iPF6400S User Manual
Page 74
12
Click
F
Scaling and enter 120.
Note
•
You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom and right
edges of the paper will not be printed.
•
If the original size after enlargement or reduction is smaller
than the paper size, the original is printed in the upper-left
corner. In this case, you can center originals by selecting
E
Print Centered on the Layout sheet.
13
Confirm the print settings and print as desired.
Note
•
For tips on confirming print settings, see "Confirming Print Settings ."
Resizing Originals by Entering a Scaling Value (Mac OS)
Resizing Originals by Entering a Scaling Value (Mac OS)
This topic describes how to enlarge originals before printing by entering a scaling value, based on the following exam-
ple.
•
Document: Any Type
•
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
•
Paper: Roll paper
•
Paper type: Plain Paper
•
Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
Resizing Originals by Entering a Scaling Value (Mac OS)
iPF6400S
Enhanced Printing Options
Printing enlargements or reductions
74