Canon imagePROGRAF iPF6400S User Manual
Page 371
Note
•
Always select media type that is actually set in the printer. When the media you chose is different from the media set in
the printer, you may not receive the desired print results.
•
Easy Settings / Advanced Settings
Two modes are available to provide the optimum print settings for jobs.
The settings available on each mode are as follows.
•
•
•
Paper Source
You can select the paper source.
The following settings are available for paper source.
Setting
Details
Manual
Select for manual paper feed printing.
Manual (3mm margins)
Select for manual paper feed printing when you want to minimize the margin at the far end edge
of paper.
Roll Paper
Select to print on roll paper.
Note
•
When you select Manual (3mm margins) for Paper Source, the far end edge of printed image may become defective
depending on the paper used. If this happens, select another paper source.
•
Roll Paper Width
This selects the width of the roll media set to the printer.
Note
•
Available only if rolls are selected in Paper Source.
•
Copies
You can input the number of print copies in numerical characters.
Note
•
The maximum value is 999.
•
You can change the numbers by clicking either ▲ button or ▼ button.
•
Restore Defaults Button
Click the button to reset to the setting when starting Preview.
•
Print Button
Click the button to begin printing.
•
Update Printer Info. Button
Click the button to acquire printer information.
iPF6400S
Paper Settings Panel
Mac OS Software
Preview
371