Up(*8), Eop timer(*8), Tcp/ip(*8 – Canon imagePROGRAF iPF6400S User Manual
Page 632: Ipv4 mode(*8), Bootp(*8), Rarp(*8), Ip address(*9), Subnet mask(*9, Default g/w(*9), Date(*9
First Level
Second Level
Third Level
Fourth Level
Fifth Level
Sixth Level
Seventh Level
Keep Paper
Size
Off* | On
TrimEdge Re-
load
Automatic | Off* | On
Rep.P.head
Print
Off | On*
Nozzle Check
Frequency
Standard* | 1 page | 10 pages | Off
Warning
Off* | On
Use Remo-
teUI(*8)
On* | Off
Erase HDD Da-
ta
High Speed(*8) | Secure High Spd.(*8) | Secure(*8)
Output Method
Print* | Print (Auto Del) | Save: Box XX
Print After Recv
Off* | On
Common Box
Set.(*4)(*8)
Print* | Print (Auto Del)
Show Job
Log(*8)
Off | On*
Prep.MovePrinter
Admin.
Menu(*9)
Change Pass-
word(*9)
(The screen for setting the password is displayed)
Init.Admin.Pswd(*9)
Adj. Fine Feed(*12)(*13)
Printer Info(*12)
Paper Info
Ink Info
Head Info
ProductName:
s/n:
Days elapsed:
Count [Mdot]:
Printhead L
ProductName: | s/n: | Days elapsed: | Count [Mdot]:
Printhead R
ProductName: | s/n: | Days elapsed: | Count [Mdot]:
System Info
Error Log
Other Counter
*1: Available after you have used Standard or Initial adjustmt in Head Posi. Adj. once.
*2: Available if Adj. Priority is Automatic or Print Quality.
*3: Available if Adj. Priority is Automatic or Print Length.
*4: Not displayed if IPv4 Mode is Manual.
*5: Not displayed if NetWare is Off.
*6: Not displayed if Auto Detect is On.
*7: Follows the setting in Date Format.
*8: Viewing and configuration is possible for administrators, and only viewing for other users.
*9: Viewing and configuration is possible for administrators only.
*10: Not displayed if IPv6 Support is Off.
*11: Default setting for the time to enter the power save mode/Sleep mode is recommended.
*12: Displayed as the menu during printing while printing is in progress.
*13: Not displayed in the regular menu.
Menu Structure
iPF6400S
Control Panel
Printer Menu
632