Canon imagePROGRAF iPF6400S User Manual
Page 640
Setting Item
Description, Instructions
Interface
Setup
TCP/IP
IPv4
Protocol
DHCP
Specify the protocol used to configure the IP address automati-
cally.
BOOTP
RARP
IPv4 Set-
tings
IP Address
Specify the printer network information when using a static IP
address.
Enter the IP address assigned to the printer, as well as the net-
work subnet mask and default gateway.
The value that was automatically configured is displayed if you
have set IPv4 Mode to Automatic.
Subnet Mask
Default G/W
DNS Set-
tings
DNS Dync update
Specify whether DNS server registration is updated automati-
cally.
Pri. DNS SrvAddr
Specify the DNS server address.
Sec. DNS SrvAddr
DNS Host Name
Specify the DNS host name.
DNS Domain Name
Specify the DNS domain name.
IPv6
IPv6 Support
Specify whether to connect via IPv6.
IPv6 StlessAddrs
Specify whether a IPv6 stateless address is used.
DHCPv6
Specify whether DHCPv6 settings are used.
DNS Set-
tings
DNS
Dync up-
date
Statefull
Addr
Specify whether DNS server registration is updated automati-
cally.
Stateless
Addr
Pri. DNS SrvAddr
Specify the DNS server address.
Sec. DNS SrvAddr
DNS Host Name
Specify the DNS host name.
DNS Domain Name
Specify the DNS domain name.
NetWare
NetWare
Specify the NetWare protocol. To apply your changes, choose
Register Setting.
Frame Type
Specify the frame type to use.
Print Service
Choose the print service.
AppleTalk
Specify whether to use the AppleTalk protocol. To apply your
changes, choose Register Setting.
Ethernet
Driver
Auto Detect
Specify the communication method. To apply your changes,
choose Register Setting.
Choose On for automatic configuration of the LAN communica-
tion protocol. Choose Off to use settings values of
Comm.Mode and Ethernet Type.
Comm.Mode
Choose the LAN communication method.
Ethernet Type
Choose the LAN transfer rate.
Spanning Tree
Choose whether spanning-tree packets are supported over the
LAN.
MAC Address
Indicates the MAC address.
Interface Print
Print interface settings information.
Return Defaults
Choose OK to restore Interface Setup settings to the default
values.
System
Setup
Sleep Timer
Specify the period before the printer enters sleep mode.
Menu Settings
iPF6400S
Control Panel
Printer Menu
640