Canon PowerShot SX600 HS - Manual (Page 94)

94
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Accessing the Wi-Fi Menu
Initial Connection via Wi-Fi
To start with, register a camera nickname.
This nickname will be displayed on the screen of target devices when
connecting to other devices via Wi-Fi.
1 Access the Wi-Fi menu.
z z Press the < 1> button to turn the camera
on.
z z Press the < o> button.
2 Enter a nickname.
z z Press the < m> button to access the
keyboard, and then enter a nickname
( = 22 ).
z z Up to 16 characters can be used.
z z Press the < o>
buttons to choose
[OK], and then press the < m> button.
z z The Wi-Fi menu is displayed.
• When connecting wirelessly to any device other than a computer, a memory
card must be inserted in the camera. Additionally, the memory card must
contain images before you can access Web services or connect to a printer
wirelessly.
• To change the camera’s nickname, choose MENU ( = 21 ) ► [ 3] tab ►
[Wi-Fi Settings] ► [Change Device Nickname].
• If the Wi-Fi menu is not displayed but only the information changes when
you press the < o> button, first press the
button to switch from detailed
information display ( = 67 ).
• A message will be displayed if the nickname you attempt to enter in step 2
begins with a symbol or space. Press the < m> button and enter a different
nickname.
After the Initial Wi-Fi Connection
• Once you have connected to devices via Wi-Fi, recent destinations will
be listed first when you access the Wi-Fi menu by pressing the < o>
button. You can easily connect again by pressing the < o>
buttons
to choose the device name and then pressing the < m> button.
• To add a new device, display the device selection screen by pressing the
< q> buttons, and then configure the setting.
• If you prefer not to display recent target devices, choose MENU ( = 21 ) ►
[ 3] tab ► [Wi-Fi Settings] ► [Target History] ► [Off].