Flash, And shoot again, Shooting with the af lock – Canon PowerShot SX600 HS User Manual
Page 61: Changing the flash mode, Which may enable adequate exposure
61
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Still Images
Movies
Shooting with the AF Lock
The focus can be locked. After you lock the focus, the focal position will not
change even when you release your finger from the shutter button.
1
Lock the focus.
z
z
With the shutter button pressed halfway,
press the <
q> button.
z
z
The focus is now locked, and [
%] is
displayed.
z
z
To unlock the focus, release the shutter
button and press the <
q> button again. In
this case, [
%] is no longer displayed.
2
Compose the shot and shoot.
Flash
Still Images
Changing the Flash Mode
You can change the flash mode to match the shooting scene. For details on
the flash range, see “Flash Range” (
1
Raise the flash.
z
z
Move the <
h> switch.
2
Configure the setting.
z
z
Press the <
r> button, press the
buttons to choose a flash mode, and then
press the <
m> button.
z
z
The option you configured is now
displayed.
•
The setting screen cannot be accessed by pressing the <
r> button
when the flash is lowered. Move the <
h> switch to raise the flash,
then configure the setting.
[ ] Auto
Fires automatically in low-light conditions.
[h] On
Fires for each shot.
[Z] Slow Synchro
Fires to illuminate the main subject (such as people) while shooting at a
slower shutter speed to illuminate backgrounds out of flash range.