Canon PowerShot SX600 HS - Manual (Page 37)

37
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Still Images
Checking for Closed Eyes
[ ] is displayed when the camera detects that people may have closed
their eyes.
1 Configure the setting.
z z Press the < n> button, choose [Blink
Detection] on the [ 4] tab, and then
choose [On] ( = 21 ).
2 Shoot.
z z [ ] flashes when the camera detects a
person whose eyes are closed.
z z To restore the original setting, choose
[Off] in step 1.
• When you have specified multiple shots in [ $] mode, this function is only
available for the final shot.
• A frame is displayed around people whose eyes are closed when you have
selected [2 sec.], [4 sec.], [8 sec.], or [Hold] in [Display Time] ( = 38 ).
• This feature is not available in continuous shooting mode ( = 33 ).
Customizing Camera Operation
Customize shooting functions on the MENU [ 4] tab as follows.
For instructions on menu functions, see “Using Menus” ( = 21 ).
Still Images
Deactivating the AF-Assist Beam
You can deactivate the lamp that normally lights up to help you focus when
you press the shutter button halfway in low-light conditions.
z z Press the < n> button, choose [AF-
assist Beam] on the [ 4] tab, and then
choose [Off] ( = 21 ).
z z To restore the original setting, repeat this
process but choose [On].