Canon PowerShot SX600 HS - Manual (Page 136)

136
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• [ ] may be displayed on the camera to warn you that the memory
card has print settings that were configured on another camera.
Changing the print settings using this camera may overwrite all
previous settings.
• After importing images to your computer, also refer to “Software Instruction
Manual” ( = 127 ) and the printer manual for further information.
Still Images
Adding Images Individually
1 Choose [Select].
z z Following the procedure in “Choosing
a Selection Method” ( = 135 ), choose
[Select] and press the < m> button.
2 Choose an image.
z z Press the < q> buttons to choose an
image, and then press the < m> button.
z z [ ] is displayed.
z z To remove the image from the photobook,
press the < m> button again. [ ] is no
longer displayed.
z z Repeat this process to specify other
images.
z z When finished, press the < n> button
to return to the menu screen.
Still Images
Adding All Images to a Photobook
z z Following the procedure in “Choosing
a Selection Method” ( = 135 ), choose
[Select All Images] and press the < m>
button.
z z Press the < q> buttons to choose
[OK], and then press the < m> button.
Still Images
Removing All Images from a Photobook
z z Following the procedure in “Choosing
a Selection Method” ( = 135 ), choose
[Clear All Selections] and press the < m>
button.
z z Press the < q> buttons to choose
[OK], and then press the < m> button.