Canon PowerShot SX600 HS - Manual (Page 126)

126
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• Correct display is not possible unless the camera video output
format (NTSC or PAL) matches the TV format. To change the
video output format, press the < n> button and choose [Video
System] on the [ 3] tab.
• When the camera and TV are connected, you can also shoot while previewing
shots on the larger screen of the TV. To shoot, follow the same steps as when
using the camera screen. However, AF-Point Zoom ( = 36 ) is not available.
Still Images Movies
Powering the Camera with Household Power
Powering the camera with AC Adapter Kit ACK-DC40 (sold separately)
eliminates the need to monitor the remaining battery level.
1 Make sure the camera is off.
2 Insert the coupler.
z z Follow step 1 in “Inserting the Battery
Pack and Memory Card” ( = 11 ) to
open the cover.
z z Insert the coupler facing the direction
shown, just as you would a battery pack
(following step 2 in “Inserting the Battery
Pack and Memory Card” ( = 11 )).
z z Follow step 4 in “Inserting the Battery
Pack and Memory Card” ( = 11 ) to
close the cover.
Terminals
3 Connect the adapter to the
coupler.
z z Open the cover and insert the adapter
plug fully into the coupler.
4 Connect the power cord.
z z Insert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
z z Turn the camera on and use it as desired.
z z When finished, turn the camera off and
unplug the power cord from the outlet.
• Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the
camera.
• Do not attach the adapter or adapter cord to other objects. Doing so
could result in malfunction or damage to the product.