Canon PowerShot SX600 HS User Manual
Page 90
90
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
8
Choose [Auto] and establish the
connection.
z
z
Press the <
o>
buttons to choose
[Auto], and then press the <
m> button.
z
z
Once the camera is connected to CANON
iMAGE GATEWAY via the access point,
an authentication code is displayed.
9
Enter the authentication code.
z
z
On the smartphone or computer, enter
the authentication code displayed on the
camera and go to the next step.
z
z
A six-digit confirmation number is
displayed.
10
Check the confirmation
numbers and complete the
setup process.
z
z
Make sure the confirmation number on
the camera matches the number on the
smartphone or computer.
z
z
Press the <
q>
[OK], and then press the <
m> button.
z
z
Complete the setup process on the
smartphone or computer.
z
z
[ ] (
) and CANON iMAGE
GATEWAY are now added as
destinations, and the [
] icon changes
to [
].
z
z
A message is displayed on the
smartphone or computer to indicate that
this process is finished. To add other
Web services, follow the procedure in
“Registering Other Web Services” from
•
You can connect to WPS-compatible access points by choosing [WPS
Connection] in step 6. For details, see steps 5 – 7 in “Connecting to WPS-
Compatible Access Points” (