Canon PowerShot SX600 HS User Manual
Page 48
48
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
4
Face the camera and wink.
z
z
The camera will shoot about two seconds
after detecting a wink by the person
whose face is inside the frame.
z
z
To cancel shooting after you have
triggered the self-timer, press the
<
n> button.
•
If the wink is not detected, wink again slowly and deliberately.
•
Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
•
Closing and opening both eyes at once will also be detected as a wink.
•
If winking is not detected, the camera will shoot about 15 seconds later.
•
To change the number of shots, press the <
o>
buttons after choosing
[
] in step 1. [Blink Detection] (
) is only available for the final shot.
•
If no one is in the shooting area when the shutter button is pressed all the way
down, the camera will shoot after a person enters the shooting area and winks.
Still Images
Using the Face Self-Timer
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
). This is useful when including yourself in group photos or similar
shots.
1
Choose [ ].
z
z
Follow steps 1 – 2 in “Specific Scenes”
) and choose [ ], and then
press the <
p> button.
z
z
Press the <
q>
[ ], and then press the <
m> button.
2
Compose the shot and press
the shutter button halfway.
z
z
Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
3
Press the shutter button all the
way down.
z
z
The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
z
z
The lamp blinks and the self-timer sound
is played.