Brother MFC-J6720DW - Manual (Page 85)

Telephone services and external devices
71
7
Changing the remote codes
7
The preset Fax Receive Code is l 5 1. The
preset Telephone Answer Code is # 5 1. If
you want to, you can replace them with your
own codes.
a
Press (Settings).
b
Press All Settings.
c
Press a or b to display Fax.
d
Press Fax.
e
Press a or b to display
Setup Receive.
f
Press Setup Receive.
g
Press a or b to display Remote Codes.
h
Press Remote Codes.
i
Do one of the following:
 If you want to change the Fax
Receive Code, press
Fax Receive Code.
Enter the new code, and then
press OK.
 If you want to change the Telephone
Answer Code, press Tel Answer.
Enter the new code, and then
press OK.
 If you do not want to change the
Codes, go to step j.
 If you want to turn the Remote Codes
Off (or On), press Remote Codes.
Press Off (or On).
j
Press .
NOTE
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Fax Receive Code and
Telephone Answer Code to another
three-digit code (such as # # # and 9 9 9).
• Remote Codes might not work with some
telephone systems.