Brother MFC-J6720DW - Manual (Page 62)

Chapter 4
48
(Advanced User’s Guide)
For more advanced fax-sending
operations and settings
(see Advanced User’s Guide: Sending a
fax).
 Contrast
 Fax Resolution
 Set New Defaults
 Factory Reset
 Faxing at the end of a call
 Broadcasting
 Real Time Transmission
 Overseas Mode
 Delayed Fax
 Batch Transmission
 Canceling Waiting Jobs
 Polled Transmit
d
Enter the fax number.
Using the dial pad
Using (Address Book)
 Address Book
Using (Call History)
 Outgoing Call
 Caller ID history
NOTE
• You can preview a fax message before
sending it by setting Preview to On. (See
How to preview an outgoing fax
on page 50.)
• If your network supports the LDAP
protocol you can search for fax numbers
and E-mail addresses on your server.
For more information, see Software and
Network User’s Guide: Perform an LDAP
Search Using the Control Panel.
e
Press Fax Start.
Faxing from the ADF
4
 The machine starts scanning and
sending the document.
Faxing from the scanner glass
4
 If you choose Black in the
Color Setting (default setting),
the machine starts scanning the first
page. Go to step f.
 If you choose Color in the
Color Setting, the Touchscreen
asks if you want to send a color fax.
Press Yes (Color fax) to
confirm. The machine starts dialing
and sending the document.
f
When the Touchscreen asks you
Next page?, do one of the following:
 To send a single page, press No.
The machine starts sending the
document.
 To send more than one page, press
Yes and go to step g.
g
Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)
Stop faxing
4
To stop faxing, press .