Brother MFC-J6720DW - Manual (Page 25)

General information
11
1
3 Paper Size (MFC-J6520DW)
See the selected paper size.
Press to change the Paper Size setting if
needed.
4 Receive Mode
See the current Receive Mode:
 Fax (Fax Only)
 Fax/Tel
 External TAD
 Manual
NOTE
When the Distinctive Ring feature is turned on,
the Touchscreen shows D/R. For more
information, see Distinctive Ring on page 64.
5 Wi-Fi
Press to set up a wireless network connection.
A four-level indicator on the screen shows the
current wireless signal strength if you are using
a wireless connection.
6 Fax Preview
See the Fax Preview setting.
Press to access the Fax Preview setting.
7 All Settings
Press to access the full Settings menu.
8 Tray #1 (MFC-J6720DW)
Press to check the size of paper in Tray #1.
Also, lets you access the Tray #1 setting.
You can change the paper size and paper type.
9 Tray #2 (MFC-J6720DW)
Press to check the size of paper in Tray #2.
Also, lets you access the Tray #2 setting.
You can change the paper size.
Basic Operations
1
Press your finger on the Touchscreen LCD to
operate it. To display and access all the
screen menus and options, press d c or a b to
scroll through them.
IMPORTANT
• DO NOT touch the Touchscreen
immediately after plugging in the power
cord or turning on the machine. Doing this
may cause an error.
• DO NOT press the Touchscreen with a
sharp object, such as a pen or stylus. It
may damage the machine.
The following steps show how to change a
setting in the machine. In this example, the
Receive Mode setting is changed from
Fax Only to Fax/Tel.
a
Press (Settings).
b
Press All Settings.
c
Press a or b to display Fax.
d
Press Fax.