E-m-hg2-s-v2.1 – ROTRONIC Hygrogen2 User Manual
Page 44

E-M-HG2-S-V2.1
Rotronic AG
Bassersdorf, Switzerland
Document code
Unit
HygroGen2: Humidity and Temperature Generator
with AutoCal/AutoCal+, Remote Control and
Range Extensions options.
Instruction Manual
Instruction Manual for Software
Version 2.1
Document Type
Page 40 of 75
Document title
To set the VNC password requires configuration mode. Please press the “Password” button to restart
the HygroGen2. Once in Configuration Mode, reselect “Remote Connection” from the Settings drop-
down menu and then press “Password”.
Figure 30: Set Password
In normal Operational Mode, the “Default” button temporarily resets the VNC password to a service
default password, which will persist until the HygroGen2 is restarted. If in Configuration Mode, pressing
“Default” will permanently set the VNC password to the service default password. You will need to set
your password again via the “Password” button if this is pressed.
To connect your VNC client to the HygroGen2, enter the Local Area Network IP address as the server
name in your VNC client, and the password as set in the previous section. You may receive a warning
that the connection is not encrypted.
© 2014; Rotronic AG
E-M-HG2-S-V2.1