ROTRONIC Hygrogen2 - Manual (Page 26)

E-M-HG2-S-V2.1
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
HygroGen2: Humidity and Temperature Generator
with AutoCal/AutoCal+, Remote Control and
Range Extensions options.
Instruction Manual
Instruction Manual for Software
Version 2.1
Document Type
Page 22 of 75
Document title
3.4.4 Edit Program Screen
1) Graphic Indicator
2) Ramp/Soak control
3) Temperature set-point
4) Humidity set-point
5) Step duration
6) Insert Step
7) Delete Step
8) Scroll to view Steps
9) Program title
10) Temperature tolerance
11) Humidity tolerance
12) Temperature Only
13) Programmer
Select a Program to Edit
Select the desired program by clicking on the program button and entering the desired program
number.
Edit a Program Name
To edit the program name click on it (USB keyboard required) (item 9).
Edit a Step
Each program is made of steps. Each step can be edited. Enter the desired step set-points and duration
(items 3, 4 & 5). A graphical representation of the step is shown to help visualise the sequence.
Insert or Delete a Step (items 6 & 7)
Use the insert and delete buttons to add and remove steps. If there are more than 7 steps in the program
use the scroll bar (item 8) to view.
Ramp or Soak (item 2)
Set temperature and humidity to either ramp or soak using item 2. A soak is where the HygroGen2
maintains the temperature and humidity in the chamber constant for the duration of the step, within
the tolerances set (items 10 & 11). A ramp is where the HygroGen2 changes the selected set point at a
rate determined by the subsequent set-point value and the current step duration.
Figure 11: Edit Program
© 2014; Rotronic AG E-M-HG2-S-V2.1