PATLITE WDR-LE - Manual (Page 98)

96
Wireless Data Aquisition System Comprehensive User's Manual
Other
10. Specifi cations
10.1 Transmitter
■ General Specifi cations
Item Specifi cation
Model Name WDT-6M WDT-5E
Corresponding Signal Tower LME Series LE Series
Rated Voltage DC24V（Non-polar）
Operating Voltage Range DC21.6V ∼ DC26.4V
Current Consumption 35mA ± 5mA
Operating Temperature Range -10 ∼ 60℃
Operating Humidity Range No more than 85％ RH (No condensation）
Storage Temperature Range -20 ∼ 70℃（No freezing）
Installation (Indoor Use） Upright Position Only
Protection Rating Conforms to Installed Signal Tower
Mass 52g ± 5g
■ Function
● Wireless network confi guration is automatically set.
※ As long as one of any signal wires is used as the power supply for the transmitter.
● An indicator displays the radio reception strength (Three Colors)
Strong：Green (Radio Strength ≧ -60dBm）
Good ：Orange (-70dBm ＜ Radio Strength ＜ -60dBm）
Poor ：Red(Radio Strength ≦ -70dBm）
● Data is sent when the condition of the Signal Tower changes.
● Data is sent for the Signal Tower color condition (Flash/Non-fl ash/Off )
● Flash/Non-fl ash/Off Parameters
ON ：The signal input is no less than 0.7 seconds in the "ON" position.
OFF ：The signal input is no less than 0.7 seconds in the "OFF" position.
FLASH：The signal has toggled to the "FLASH" position at least two (2) times within 0.7 seconds.
（Signal inputs that change within 0.1 seconds are ignored）
※ Flash valid/invalid status setting can be changed (Factory Setting is at "valid")
Changes to wireless settings for each unit can be performed.