PATLITE WDR-LE - Manual (Page 35)

33
Wireless Data Aquisition System Comprehensive User's Manual
■ For USB Connection （WDR-L/WDR-U）
:DUQLQJ
Prohibited
Do not allow the Receiver(WDR-L/U) to be in contact with water or other liquids, nor
subject it to a highly dusty or humid environment.
Failure to do so may result in fi re, static electricity or malfunction.
Enforced
The Receiver (USB Connection Type：WDR-U) is powered by the computer's USB bus.
Connect it only to a USB standardized computer port. The Reciever will not function from
a USB hub.
Failure to do so may result from malfunction to fi re or electric shock.
&DXWLRQ
Prohibited
Do not use in a location where water, metal powder or oil mist is present.
Failure to do so may result in USB malfunction.
Please
● USB hubs are not supported. Connect the WDR-U directly to the USB port of the computer.
● No LAN communications are available when the USB is connected, so do not connect any LAN cables
during USB connections.
● Do not use USB cables longer than 3 meters. The possibility of noise can cause malfunction.
＜ For Windows XP ＞
1
Computer to Reciever connection.
（For WDR-LE USB Connection）
Plug the USB cable into the computer to connect to the
Receiver.
Note
● USB Cable not included.
（For WDR-U）
Connect the Reciever to the USB port of the computer.
➡ The [New Hardware] detection wizzard will start when
the USB has been used for the fi rst time.
Anytime after that, the USB will be automatically
detected and will soon transmit data.