PATLITE WDR-LE - Manual (Page 86)

84
Wireless Data Aquisition System Comprehensive User's Manual
9.5 Start-up
No. Name Function
❶ [Run/Stop] Button "Run" and "Stop" button for the Application Software.
During "Run" mode, "Stop" displays in red, during "Stop" mode, "Run"
displays in green.
❷ COM Port (For USB Only) Select the COM port for the USB.
❸ Confi gure File Name Displays the confi gured fi le loaded-in.
❹ Transmitter MAC Address Display Displays MAC Address of received data from corresponding transmitter.
❺ [Load Defi nition File] Button Loads the saved confi gure fi le with the ".init" extension.
❻ Output File Name Designation Displays the name of the CSV output fi le.
❼ [Automatic Confi guration] Button The CSV Output File name is automatically set.
Patlog_auto2009_12_2.csv
Set Name Output Month and Day
＜ Ex. ＞
When the day changes, the fi le name automatically changes so a new fi le
name will be generated for a new output fi le.
❽ [Log Display] Button Log display window toggles open and closed. (Illustration displays log)
❾ [Log Clear] Button Click the button to clear the log display.
Log Monitor Area When the signal tower condition changes, it is logged in the monitor area.
Depending on the condition, the color distinquishes the status as indicated
below:
Yellow ： Signal Strength
Orange ： Message
Blue
： Transmitter (Data sent from computer)
Green ： Receiver (Data sent from transmitter)
[Message] Button Displays messages in orange in the Log Monitor Area.
[Output Log] Button Displays log output in green and blue in the Log Monitor Area.
[Signal Strength] Button Displays the signal strength in yellow in the Log Monitor Area.
❶
❷
❾
❻
❼
❽
❸ ❹ ❺
Signal Strength
Signal Tower color status（R、Y、G、B）
（0：Off , 1：On, 2：Flash, 9：Power Set）
Username
MAC Address