PATLITE WDR-LE - Manual (Page 19)

17
Wireless Data Aquisition System Comprehensive User's Manual
■ WDT-6M and WDT-5E
Attach according to the fi gure to the right.
The fi gure depicts the LE Series.
A special bracket is made for the LME Series.
1
Turn the power off before installation.
2
Unscrew the center screw then pull straight out
to remove.
3
Remove the Head Cover.
Please
● After removal, store the Head Cover for future use.
4
Attach the Special Bracket to the Signal Tower.
At this point, check the place where the tabs meet and
snap into place with the Special Bracket attached.
Please
● Be sure the mounting orientation of the Bracket is
correct.
● Be sure not to touch or that there is no oil, dirt
or such that can inhibit connection to the metal
connectors of the Bracket.
Center
Screw
Head
Cover
Tab Location
Tab Hole Location
Signal Tower
(top view)
Special Adaptor
(bottom view)