PATLITE WDR-LE - Manual (Page 57)

55
Wireless Data Aquisition System Comprehensive User's Manual
8.4 Wireless Setting ID
Parameter to change the wireless setting ID parameters when acquisitioning the wireless module.
＜ Wireless Setting ID List ＞
№ Wireless Setting ID ID Value
(1) PanID 0x0210
(2) Frequency Channel 0x0211
(3) Module Setting, Output Strength 0x0230
(4) Status Confi rmation Setting 0x0237 ※ For Receivers set as "Valid"
(5) Group ID 0x0247
(1) 0x0210 : PanID
Wireless Setting ID
Wireless Setting ID Data
PanID1 PanID2 PanID3 PanID4
0x02 0x10 Hi Low Hi Low Hi Low Hi Low
2 byte 2 byte 2 byte 2 byte 2 byte
① PanID １∼４ ： PanID candidate for Network.
With PanID1 as the preferred search, the next prioritized PanID is used
when a collision occurs.
The valid range is from 0x0000 to 0x03FF.
When 0xFFFF is set, it makes the PanID target search invalid.
(2) 0x0211 : Frequency Channel
Wireless Setting ID
Wireless Setting ID Data
Frequency Channel
0x02 0x11 Hi Low
2byte 4byte
①
① Frequency Channel ： Network Wireless Band used.
It is possible to validate two or more bands. In this case, the channel set for
the selected band is automatically searched for.
The frequency setting is incremented every 5MHz in the range from bit11
（2405MHz) to bit26 (2480MHz).
multiple bits can be set. The default setting is 0x7FFF800.