PATLITE WDR-LE - Manual (Page 51)

49
Wireless Data Aquisition System Comprehensive User's Manual
(5) 0x30：Receiver Contact Controller（Applies only to Valid Receivers）
P_Cmd Special Data
Contact
Control 0x30
1 byte 1 byte
①
Use the Receiver "OUTPUT" function (Contact Controller) when activated.
Transmit 0x0000 only for Short Address.
① Contact Control ： 0x00 ：Stop Output
0x01 ：Start Output
【Response】
P_Cmd Special Data
Status
0x50
1 byte 1byte
Note
● Please be aware that for the receiver command, the receiver notifi cation LQI data, return MAC
Address data, etc., will be returned as "dummy data".
Status 0x01 ：Pass
0xFF ：Fail